All-Test Pro

Ensure that testing your motor is safe, easy, and dependable

Motor testing is integral to the success and efficiency of your machinery. ALL-TEST Pro instruments ensure that testing your motor is safe, easy, and dependable. Our capabilities for troubleshooting and predictive maintenance are a means of sustaining critical systems and achieving meaningful ROI. Don’t leave motor failure up to chance – reap the cost-saving benefits of complete motor testing.

All-Test Pro AT7

AT7 Professional

  • Finding just one fault using the AT7™ PROFESSIONAL can save your organization countless hours of downtime and provide thousands of dollars in savings.
  • Test newly installed motors to ensure proper installation and prevent startup failure.
  • Test motor spares to ensure they are in good condition and ready for service.
  • Troubleshoot motors that have quit running by testing from the MCC or directly at the motor.
All-Test Pro AT34

AT34

  • Finding just one fault using the AT34™ can save your organization countless hours of downtime and provide thousands of dollars in savings.
  • Test newly installed motors to ensure proper installation and prevent startup failure.
  • Test motor spares to ensure they are in good condition and ready for service.
  • Troubleshoot motors that have quit running by testing from the MCC or directly at the motor.
  • Test 3-phase AC induction squirrel-cage rotor motors < 1,000V.
All-Test Pro AT31

AT31

  • Perfect for troubleshooting and inspection of incoming or stored motors prior to installation or repair
  • Displays complete condition of stator windings, rotor and connections
  • Quick test comparison between first and last test in only minutes
  • Offers complete picture of motor condition without having to stress-test the windings or use other more expensive or elaborate instruments
  • Motor health trending tests offer historical testing data comparison at a glance
All-Test Pro Motor Genie

Motor Genie

  • Locates winding faults such as turn to turn and coil to coil, along with grounded windings
  • Measures impedance (Z), phase angle (Fi), current/frequency response (I/F), and insulation to ground resistance (500V or 1000V and measure to 500 meg-ohm)
All-Test Pro ATPOL II

ATPOL II

  • Two complete instruments in one: Electric Signature Analyzer (ESA) and a Power Quality Analyzer (PQ)
  • ESA mode evaluates the condition of incoming power, the control circuit, the motor itself, and the driven load
  • PQ mode used for energy data logging, harmonic analysis, voltage and current charting, viewing and capturing waveforms, including sags and swells, transient capture and event capture
  • Results can be trended for condition-based maintenance/predictive maintenance purposes

Increase Your Machinery's Reliability